Blade Change Port Covers

Improve your the performance of your saw’s dust collection with this custom-fit cover.

This listing is for the older Festool TS55 EBQ Plunge Saw. See a separate listing for the new TS55 R series of saws.

The hole in the case of your plunge saw is there to allow you to change your blade. The rest of the time 'it’s just a hole which reduces the performance of your dust collection. This stylish cover is a really good alternative to using “Gaffer Tape” and is easily removable.

There are two variants in this listing.

1. A plain cover in Green.

2. A plain cover in Silver.

The reverse side of the cover features the clips that secure the cover to the saw and the Strawbyte logo.

Fitting is simple, locate the two clips into the back edge of the hole and press firmly. Note that the fit may be slightly loose but it won’t fall out and it doesn’t affect the performance of the cover when you turn on dust collection. It quickly seats itself into the hole and there’s just enough ‘looseness’ to allow you to put a small screwdriver under the front edge to pop it off when you need to change the blade.

Please note that Festool® and the Festool® Logo are trademarks of Festool®. Special thanks to Petrus Szabi for his invaluable assistance in testing this product and supplying the product photograph. And to Fred Gormer who helped greatly in developing the second revision which considerably improved the fit and finish.

Improve your the performance of your saw’s dust collection with this custom-fit cover.

This listing is for the new Festool TS55 R, K and F series plunge saws. See a separate listing for the older TS55 EBQ saws.

The hole in the case of your plunge saw is there to allow you to change your blade. The rest of the time 'it’s just a hole which reduces the performance of your dust collection. This stylish cover is a really good alternative to using “Gaffer Tape” and is easily removable.

There are two variants in this listing.

1. A plain cover in Green.

2. A plain cover in Silver.

The reverse side of the cover features the clips that secure the cover to the saw and the Strawbyte logo.

Fitting is simple, locate the two clips into the back edge of the hole and press firmly. Note that the fit may be slightly loose but it won’t fall out and it doesn’t affect the performance of the cover when you turn on dust collection. It quickly seats itself into the hole and there’s just enough ‘looseness’ to allow you to put a small screwdriver under the front edge to pop it off when you need to change the blade.

Please note that Festool® and the Festool® Logo are trademarks of Festool®. Special thanks to Petrus Szabi for his invaluable assistance in testing this product and supplying the product photograph. And to Fred Gormer who helped greatly in developing the second revision which considerably improved the fit and finish.

Improve your the performance of your saw’s dust collection with this custom-fit cover.

This listing is for the Makita SP6000 series plunge saws and not the DSP600 Series Battery Saws

The hole in the case of your plunge saw is there to allow you to change your blade. The rest of the time 'it’s just a hole and that hole reduces the performance of your dust collection. This stylish cover is a really good alternative to using gaffa tape and is easily removable.

There are two variants in this listing. See a separate listing for a personalised cover.

1. A plain cover in Teal, Blue, Silver or Black;

2. Containing the embossed word Makita in Teal, Blue, Silver or Black.

The reverse side of the cover features the clips that secure the cover to the saw and the Strawbyte logo.

Fitting is simple, locate one edge into hole and press firmly. Note that the fit may appear loose but that doesn’t affect the performance of the cover when you turn on dust collection. It quickly seats itself into the hole and there’s just enough ‘looseness’ to allow you to put a small screwdriver under an edge to pop it off when you need to change the blade.

Please note that Makita® and the Makita® Logo are trademarks of Makita®. A public domain source was used to obtain a representation of the makita name for use in this design.

Improve your the performance of your saw’s dust collection with this custom-fit cover.

This listing is for the DSP600 Series Battery Plunge Saws and its successors (XPS01Z XPS02ZU) and not the 110v/220v/230v Makita SP6000 series

The hole in the case of your plunge saw is there to allow you to change your blade. The rest of the time 'it’s just a hole and that hole reduces the performance of your dust collection. This stylish cover is a really good alternative to using gaffa tape and is easily removable.

There are two variants in this listing. See a separate listing for a personalised cover.

1. A plain cover in Teal, Blue, Silver or Black.

2. Containing the embossed word Makita in Teal, Blue, Silver or Black.

The reverse side of the cover features the clips that secure the cover to the saw and the Strawbyte logo.

Fitting is simple, locate one edge into hole and press firmly. Note that the fit may appear loose but that doesn’t affect the performance of the cover when you turn on dust collection. It quickly seats itself into the hole and there’s just enough ‘looseness’ to allow you to put a small screwdriver under an edge to pop it off when you need to change the blade.

Please note that Makita® and the Makita® Logo are trademarks of Makita®. A public domain source was used to obtain a representation of the makita name for use in this design.