This set of parts provides a simple means to mount your systainer in a custom drawer or dolly/cart and secure it in-place.

Supplied with a drawing to allow easy installation, two parts lock the back of the systainer to the base-board being used, front left and right parts locate mate with the two front feet of the systainer. And the locking catch swivels on a screw (3.5mm recommended) to clip over the lugg at the front of the systainer.

MR MDF or Plywood is recommended with a minimum thickness of 15mm. A notch needs to be cut into the baseboard to match the profile of the systainer (a scale template is included in the kit) and this front edge needs to be at least 24mm thick not allow the catch-screw to be mounted.

Available in Lucid Green, which is a close match to the overall colour scheme of systainer stack

Important Dispatch Information: Due to high demand these are being made to order and so please expect 2-3 working days between order and shipping

The mounting kit is only for Tanos T-Loc style systainers (which includes the Systainer3). They are not suitable for classic systainers of Makita Makpaks

Material Used: PET-G